Serie BR
Industrial division
Serie BR

Centrifugal fans for low and medium pressures and medium and high flow rates.

Rate:
m³/s: 0,25 ÷ 26,3 - m³/h: 900 ÷ 95.000
Pressure:
Pa: 78 ÷ 3.775 - mm. H²O: 8 ÷ 385

Diameter of the impeller: from 250 to 1000 mm

Backward blade series of fans manufactured to obtain medium-high pressures with low flow rates, high performances and moderate noise levels.
BR series is particularly suitable either for ventilation of wide industrial environments or in clean or not very dusty air suction, finding a wide use in conditioning, drying, gas and vapour removal, etc...

Working fluid temperature can go up to + 80°C for standard execution and up to + 200°C for SV execution. Higher temperatures can be reached with suitable changes in standard product.

The impeller, in welded steel sheet, is manufactured with backward curved blades.BR standard series fans are manufactured in arrangement 4, equipped with a motor support base. The installed motors are in B3 construction, 2, 4, 6 poles, enclosed selfventilated and standardized UNEL MEC ip55 clF.

grafico delle rese

Chart yields

prodotti correlati

SERIE br

Ventilatori centrifughi per basse pressioni e basse portate.

[25 modelli]
Portata:
m³/s: 0,017 ÷ 0,7 - m³/h: 60 ÷ 2.500
Pressione:
Pa: 59 ÷ 1.472 - mm. H2O: 6 ÷ 150
SERIE brq

Ventilatori centrifughi per basse pressioni e basse portate.

[25 modelli]
Portata:
m³/s: 0,017 ÷ 0,7 - m³/h: 60 ÷ 2.500
Pressione:
Pa: 59 ÷ 1.472 - mm. H2O: 6 ÷ 150
SERIE m

Ventilatori centrifughi per basse pressioni e basse portate.

[11 modelli]
Portata:
m³/s: 0,017 ÷ 0,7 - m³/h: 60 ÷ 2.500
Pressione:
Pa: 59 ÷ 1.472 - mm. H2O: 6 ÷ 150

Request information

Fill out the form below and request information on Mistral products


Privacy Policy* (read)